The building type request to reduce the self-weight of the platform and the load of construction as low as possible;When strengthening the rigidity of the platform, we need to reduce the influence of self-weight of the platform on itself at the same time. That is to say, in the process of platform assembly, tighter doesn't mean better. As if the self-weight of the platform is too large, the load of the lifting system will increase.Meanwhile, we should pay attention to the matter of material stacking on the platform during the slippage. In the process of which, it is necessary to make the material stacking on the platform stationary, and try to make the pile-up as little as possible and multiple feed in the materials when ensure the use of the materials. To achieve this, the vertical transport equipment must be equipped reasonably. We have adopted two tower cranes for lifting materials like steel bars and lifting rods, etc.
Ensure the pouring strength of concrete and the speed of the reinforcement binding of steel bars.