LF-BJMB
Construction technology of thermal insulation cotton for steel structure workshop

Construction technology of thermal insulation cotton for steel structure workshop

Installation method of thermal insulation cotton for steel structure workshop:

1. Vertical purlins are laid in place.

2. The ends are fixed.

3. Horizontal overlap.

4. Vertical overlap.

5. Laying of roof panels.



Thermal insulation cotton roof construction of steel structure workshop

1. Develop the glass wool felt for steel structure in the direction perpendicular to the purlin. For the glass wool felt with veneer, the veneer side is exposed indoors, which makes the room beautiful and has a good reflective effect. Leave about 20 cm of rolled felt on the eaves on one side, and fix it to the outermost purlins with special clamps or double-sided tape.

2. When laying the glass wool roll felt, ensure the alignment and tension. Lay the glass wool roll felt on the other eaves and leave 20 cm of roll felt, and fix it on the outermost purlin with special furniture or double-sided tape. on.

3. The two rolls of cotton are connected by a stapler binding method on the veneer flash.

4. Install the roof color steel plate, remove the special fixtures on the eaves on both sides, and use the reserved 20 cm veneer to close the glass wool to obtain a good moisture-proof effect.

Thermal insulation cotton wall construction of steel structure workshop

1. The veneer faces the side of the room, unwind from the eaves to the corner, and fix the glass roll felt to the bottom purlin with double-sided tape, leaving an extra 20 cm.

2. Cut the glass wool roll felt 20 cm above the top of the wall and fix it with double-sided tape.

3. Edge the glass wool and install the wall color steel plate.

4. The horizontal connection of cotton and cotton is connected by a stapler binding method on the veneer flash.

Thermal insulation cotton wall construction of steel structure workshop

1. The veneer faces the side of the room, unwind from the eaves to the corner, and fix the glass roll felt to the bottom purlin with double-sided tape, leaving an extra 20 cm.

2. Cut the glass wool roll felt 20 cm above the top of the wall and fix it with double-sided tape.

3. Edge the glass wool and install the wall color steel plate.

4. The horizontal connection of cotton and cotton is connected by a stapler binding method on the veneer flash.

Note for installation of thermal insulation cotton in steel structure workshop:

1. During installation, keep the glass wool roll felt tight, aligned, and the seams between rolls are tight. If overlap is required in the longitudinal direction, the overlap should be arranged at the purlin.

2. According to the needs of the project, in order to avoid the occurrence of cold bridges, some rigid insulation materials can be considered on the purlins for roof construction.

Related News
  • San Buenaventura Supercritical Power Project

    San Buenaventura Supercritical Power Project

    April 29, 2019San Buenaventura is a 500MW coal-fired supercritical power project under construction in the Quezon province of the Philippines. Scheduled for commissioning in 2019, it will be the first superc...view
  • Orangeburg Municipal Airport Adding New Hangar

    Orangeburg Municipal Airport Adding New Hangar

    February 2, 2018A local company is planning to build a new hangar at the Orangeburg Municipal Airport.Orangeburg City Council approved first reading Tuesday evening of an ordinance leasing property at the airport to ...view
  • Prefabricated buildings are no longer zero standards

    Prefabricated buildings are no longer zero standards

    October 30, 2018In September, the Hong Kong Buildings Department announced the first list of approved units for the assembly of synthetic building law, including three companies including Hong Kong company Alu House ...view
  • Types of Steels in the Steel Industry

    Types of Steels in the Steel Industry

    November 23, 2017Steel is an important element in our day-to-day lives is an alloy of iron and other element particularly carbon which is widely used in construction and other applications. They're widely used because...view
  • Coal fired power plant

    Coal fired power plant

    May 17, 2018Coal fired power plants are a type of power plant that make use of the combustion of coal in order to generate electricity. Their use provides around 40% of the world's electricity and they are primar...view
  • Henan Zhengzhou Olympic Sports Center is expected to be completed by the end of the year

    Henan Zhengzhou Olympic Sports Center is expected to be completed by the end of the year

    December 17, 2018(four center renderings)On November 20, the reporter learned from Zhengzhou that before December 31 this year, Zhengzhou Olympic Sports Center, one of the four centers of Zhengzhou, will be completed ...view
  • TEL:+86 516 8595 0258
  • FAX:+86 516 8595 0278
  • Email:marketing01@cnxzlf.com
  • ADDRESS:222, Block B, Diamond International, Guozhuang Road, Xuzhou, Jiangsu, China

[QUERYS RESOURCE ID #57]

Total quantity:925, Total process time:0.24740386 ms

[FILES LOADED]

Total quantity:22

Use Memory: 12.3MB

Time-consuming: 0.41981 ms