LF-BJMB
Limestone Storage – A Spatial Structure Application

Limestone Storage – A Spatial Structure Application

The cement manufacturing process starts from the mining of raw materials that are used in cement manufacturing, mainly limestone and clay.

The limestone is excavated from open cast mines after drilling and blasting and then loaded onto dumpers, which transport the materials and unload it into hoppers of limestone crushers. The clays are excavated from open cast mines and loaded onto dumpers, which transport the materials and unload it into open yard storage.

As we know cement manufacturer or cement company operator have to ensure that their product maintain quality and consistent properties. But most of the limestone quarries produce material of varying chemical composition. To obtain consistent quality in final product, quarried raw material must be blended before it is fed into the kiln. With our structure, any amount of limestone can be stored.
Although stockpiles are created by slewing stacker to minimize fugitive dust, most of the cement producers enclose their stockpile to protect the surrounding environment, and to prevent loss of material due to water runoff and wind.

The construction systems uses mild steel in case of limestone shed, no welding is required because the connection of the member consists of a very efficient moment-resistant mechanical joint. Limestone shed may be built in single- or double-layer configurations, depending on the load and span for the application. Experience suggests that for the spans required in limestone covers, a-double-layer is the most cost-effective.

Limestone Storage – A Spatial Structure Application

Advantage of limestone storage shed:
  • For achieving effective prevention and control of potential fugitive emission
  • Lesser Operation and Maintenance cost
  • Comply with current environmental guidelines by CPCB (Central Pollution control board)

Conclusion: 

Our Structure is fully complying with new environmental regulations for air quality and prevention and control of fugitive emission. So that it does not require stock pile owners to make huge investments or shut down operations. Our solutions presented here not only allow affordable compliance, but also enhance the reputation of any plant.
Related News
  • Welding Technology for Grid Steel

    Welding Technology for Grid Steel

    November 23, 20171. welding process designDetermine the welding method, welding parameters and welding rod, welding wire, flux specification models, etc..2. spot weldingWelding structure in the splicing, assembly to d...view
  • Spiral Sightseeing Platform a New Landmark in Changsha

    Spiral Sightseeing Platform a New Landmark in Changsha

    November 23, 2017Photo taken on March 27, 2017 shows the overview of the spiral sightseeing platform at the Meixi Lake in Changsha, capital of central China's Hunan Province. Made from 7,000 tonnes of steel, the spira...view
  • China's capacity cuts lead to healthier industries: Ministry

    China's capacity cuts lead to healthier industries: Ministry

    November 20, 2017TIANJIN — Reduction in production capacity has led to soaring profits and healthier coal mining and steel industries in China, according to the Ministry of Land and Resources.Capacity cutting, part ...view
  • LF Group wins African market by credibility and reputation

    LF Group wins African market by credibility and reputation

    June 27, 2019On June 19-21, LF Group organized and participated in the 2019 China (Xuzhou) International Service Outsourcing Cooperation Conference and International Digital Economy Summit, winning the African mar...view
  • Long Span Spatial Structures Systems

    Long Span Spatial Structures Systems

    November 21, 2017Long span spatialstructures systems provide large areas of open floor space with fewer interior columns. Freedom from interior obstructions allows maximum use of space and operating efficiency. This o...view
  • Coal storage shed Intersection and Combination

    Coal storage shed Intersection and Combination

    November 20, 2017The basic forms of latticed shells are single-curvature cylinders, double-curvature spheres, and hyperbolic paraboloids. Many interesting new shapes can be generated by intersecting and combining thes...view
  • TEL:+86 516 8595 0258
  • FAX:+86 516 8595 0278
  • Email:marketing01@cnxzlf.com
  • ADDRESS:222, Block B, Diamond International, Guozhuang Road, Xuzhou, Jiangsu, China

[QUERYS RESOURCE ID #57]

Total quantity:873, Total process time:0.24567127 ms

[FILES LOADED]

Total quantity:22

Use Memory: 11.7MB

Time-consuming: 0.41871 ms